TC4427COA713
| Manufacturer | MicroChip |
|---|---|
| Manufacturer Model | MICROCHIP-TC4427COA713 |
| Lot number | 22+ |
| Package | SOIC-8 |
| Part | TC4427COA713 |
| PRODUCT CATEGORY | Integrated Circuits（ICs） |
| Description | |
| DATASHEET | PDF Datasheet |
The TC4426/4427/4428 are improved versions of the earlier TC426/427/428 family of buffer/drivers (with which they are pin compatible). They will not latch up under any conditions within their power and voltage ratings. They are not subject to damage when up to 5V of noise spiking (of either polarity) occurs on the ground pin. They can accept, without damage or logic upset, up to 500 mA of reverse current (of either polarity) being forced back into their outputs. All terminals are fully protected against up to 2kV of electrostatic discharge. As MOSFET drivers, the TC4426/4427/4428 can switch 1000pF gate capacitances in 25 nsec, and provide low enough impedances in both the ON and OFF states to ensure the MOSFET's intended state will not be affected by large transients. However, the recommended pin-compatible drivers are the TC4426A/27A/28A. These drivers have matched input to output leading edge and falling edge delays, tD1 and tD2, for processing short duration pulses in the 25 nsec range. They are pin compatible with the TC4426/27/28.
For product comparison, please consider:TC4427A
Feature
Wide Operating Range: 4.5V to 18V
High Capacitive Load Drive Capability: 1000pF in 25nsec
Short Delay Times: 40nsec Typical
Consistent Delay Times With Changes in Supply Voltage
Low Supply Current
With Logic '1' Input: 4.5 mA
With Logic '0' Input: 400µA
Low Output Impedance: 7Ω Typical at 25 °C
Latch-Up Protected: Will Withstand >0.5A Reverse Current, Down to – 5V
Input Will Withstand Negative Inputs
ESD Protected: 2kV HBM
Pinouts Same as TC426/27/28
Technical Parameters
Product:MOSFET Gate Drivers
Configuration:Non-Inverting
Number of Drivers:2
Rise Time:19 ns
Fall Time:19 ns
Supply Voltage Max:18 V
Supply Voltage Min:4.5 V
Supply Current:4.5 mA
Maximum Power Dissipation:470 mW
Maximum Operating Temperature:+ 70 C
Mounting Style:SMD/SMT
Package / Case:SOIC-8
Type:Low Side
Minimum Operating Temperature:0 C
Number of Outputs:2
Operating Supply Voltage:4.5 V to 18 V
Packaging:Reel
Factory Pack Quantity:3300
Stock:5568
Minimum Order:1
Looking for a lower wholesale price? Send a quick inquiry and we'll get back to you ASAP!The TC4426/4427/4428 are improved versions of the earlier TC426/427/428 family of buffer/drivers (with which they are pin compatible). They will not latch up under any conditions within their power and voltage ratings. They are not subject to damage when up to 5V of noise spiking (of either polarity) occurs on the ground pin. They can accept, without damage or logic upset, up to 500 mA of reverse current (of either polarity) being forced back into their outputs. All terminals are fully protected against up to 2kV of electrostatic discharge. As MOSFET drivers, the TC4426/4427/4428 can switch 1000pF gate capacitances in 25 nsec, and provide low enough impedances in both the ON and OFF states to ensure the MOSFET's intended state will not be affected by large transients. However, the recommended pin-compatible drivers are the TC4426A/27A/28A. These drivers have matched input to output leading edge and falling edge delays, tD1 and tD2, for processing short duration pulses in the 25 nsec range. They are pin compatible with the TC4426/27/28.
For product comparison, please consider:TC4427A
Feature
Wide Operating Range: 4.5V to 18V
High Capacitive Load Drive Capability: 1000pF in 25nsec
Short Delay Times: 40nsec Typical
Consistent Delay Times With Changes in Supply Voltage
Low Supply Current
With Logic '1' Input: 4.5 mA
With Logic '0' Input: 400µA
Low Output Impedance: 7Ω Typical at 25 °C
Latch-Up Protected: Will Withstand >0.5A Reverse Current, Down to – 5V
Input Will Withstand Negative Inputs
ESD Protected: 2kV HBM
Pinouts Same as TC426/27/28
Technical Parameters
Product:MOSFET Gate Drivers
Configuration:Non-Inverting
Number of Drivers:2
Rise Time:19 ns
Fall Time:19 ns
Supply Voltage Max:18 V
Supply Voltage Min:4.5 V
Supply Current:4.5 mA
Maximum Power Dissipation:470 mW
Maximum Operating Temperature:+ 70 C
Mounting Style:SMD/SMT
Package / Case:SOIC-8
Type:Low Side
Minimum Operating Temperature:0 C
Number of Outputs:2
Operating Supply Voltage:4.5 V to 18 V
Packaging:Reel
Factory Pack Quantity:3300
&d50f247e.png "Holmate Technology Corp. (Holtek)")
